 |
|||
 |
|||
|
|||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
VCC-F22 Series |
Features
 | 29 mm Cubic Shape |
| High Definition |
| High Frame Rate |
| C-mount |
| Miniature Camera Link Connector |
| External Trigger Shutter |
| Partial Scan Function (F22V39CL) |
Specifications
VCC-G22U29 ACL/APCL (PoCL Lite will be applicable) |
VCC-F22S29 CL/PCL |
VCC-F22V39 CL/PCL |
|
| Standard | UXGA | SXGA | VGA |
| Image Sensor | 1/1.8 inch CCD | 1/2 inch CCD | 1/3 inch CCD |
| Power Consumption | 2.5 W | 2.7 W | 2.5 W |
| Power Supply Input Voltage | +12 VDC +/- 10% (Maximum voltage should not exceed 15V) | ||
| Environmental Conditions | Temperature 0 to +40°C Humidity 20 to 80% | ||
| Mass | Approx. 50g | ||
| Lens Mount | C-mount | ||
| Optical Axis Precision | Image Center: +/- 0.1 mm and less | ||
| Video Signal Output | RAW / RGB | Digital RAW 8 bit / 10 bit (Switchable) | |
| Number of Effective Pixels | 1628 (H) x 1236 (V) | 1392 (H) x 1040 (V) | 659 (H) x 494 (V) |
| Horizontal Scanning Frequency | 25.568 kHz | 27.425 kHz | 62.936 kHz |
| Pixel Frequency | 49.090 MHz | ||
| Pixel Size | 4.4 x 4.4 (µm) | 4.65 x 4.65 (µm) | 7.4 x 7.4 (µm) |
| Minimum Object Illumination | F1.4 20 lx and less | F1.4 40 lx and less | F1.4 50 lx and less |
| Sensitivity | F5.6 2000 lx | F4.0 400 lx | F4.0 400 lx |
| Standard Illumination Color Temperature | 3200°K +/- 50°K | ||
| Gain Switching | -1 dB to + 12 dB | ||
| Electronic Shutter | OFF to 1/40000 s | OFF to 1/20000 s | OFF to 1/40000 s |
| External Trigger | Fixed Shutter Exposure / Pulse Width Exposure | ||
| Partial Scan | - | 1/2, 1/4, 1/6 SCAN | |
| Gamma Correction | OFF Fixation | ||
| Communication Interface | Camera Link / RS232C | ||
| External Dimensions | 29 mm x 29 mm x 29 mm (except Projection) | ||
Important Note about the Power Supply and Repair
Power supply of some products is adapted to Japanese 100V specifications. In case of using it outside of Japan, please be sure to use a voltage converter for each country/area.Also, when you need to repair the products purchased from Pulse Denshi, please send them back to us so we can offer repair cost estimates. Your local service center may not accept such repair.
Company and product names mentioned in this website are trademarks of their respective owners.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
 |