Pulse Denshi Home Page

AND OR
Pulse Denshi is a distributor for broad range of domestic and overseas markets based in Akihabara, Tokyo
HOME
Video Equipment
Electronic Parts
Outsourcing and Import Services

VCC-F40 Series
VCC-F40U24 / VCC-F40X34 / VCC-F40V24
- (CIS Corporation)



Product Appearance



Features

High Definition
High Frame Rate
C-mount
Analog RGB Output
Random Trigger
External Synchronization HD / VD Input, HD / External Trigger
Electronic Shutter
Serial Communication Control



Specifications

 
VCC-F40U24
VCC-F40X34
VCC-F40V24
Standard UXGA XGA VGA
Image Sensor 1/1.8 inch CCD 1/3 inch CCD 1/2 inch CCD
Power Consumption 3.5 W 2.5 W 2.5 W
Power Supply Input Voltage +12 VDC +/- 10%
Environmental Conditions Temperature 0 to +40°C Humidity 20 to 80%
Mass Approx. 170g
Lens Mount C-mount
Optical Axis Precision Image Center: +/- 0.1 mm and less
Video Signal Output Analog RGB Output
Number of Effective Pixels 1628 (H) x 1236 (V) 1034 (H) x 779 (V) 659 (H) x 494 (V)
Horizontal Scanning Frequency 18.750 kHz 29.825 kHz 31.468 kHz
Pixel Frequency 36 MHz 30 MHz 24.545 MHz
Pixel Size 4.4 x 4.4 (µm) 4.65 x 4.65 (µm) 9.9 x 9.9 (µm)
Minimum Object Illumination F1.4 15 lx F1.4 25 lx F1.4 18 lx
Sensitivity F8 2000 lx F5.6 2000 lx F5.6 2000 lx
Standard Illumination Color Temperature 3200°K
Gain Switching 0 dB to + 12 dB
Electronic Shutter 1/15 s (OFF) to 1/12000 s 1/30 s (OFF) to 1/10000 s 1/60 s (OFF) to 1/12000 s
Synchronization Method Internal Synchronization; External Synchronization HD / VD
External Trigger Fixed Shutter Exposure / Pulse Width Exposure
Partial Scan -
Gamma Correction OFF Fixation
Communication Interface RS232C
External Dimensions 44 mm x 44 mm x 77 mm (except Projection)


Important Note about the Power Supply and Repair

Power supply of some products is adapted to Japanese 100V specifications. In case of using it outside of Japan, please be sure to use a voltage converter for each country/area.
Also, when you need to repair the products purchased from Pulse Denshi, please send them back to us so we can offer repair cost estimates. Your local service center may not accept such repair.

Company Profile          General Terms and Conditions          Inquiry Form


Company and product names mentioned in this website are trademarks of their respective owners.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
Copyright (C) 1999 - PULSE Denshi Co., Ltd. All rights reserved.