 |
|||
 |
|||
|
|||||
|
DCC-G01V40 - (CIS Corporation) |
Features
 | High Definition |
| High Frame Rate |
| Analog Output |
| External Trigger Shutter |
| Partial Scan Function |
Specifications
| DCC-G01V40 | |
| Standard | VGA |
| Image Sensor | 1/4 inch CCD |
| Power Consumption | 1.5 W |
| Power Supply Input Voltage | +12 VDC +/- 10% |
| Environmental Conditions | Temperature 0 to +40°C Humidity 20 to 80% |
| Mass | Approx. 24g |
| Lens Mount | Customized Lens Mount |
| Video Signal Output | VS Output 1 Vp-p (Sync Negative) |
| Number of Effective Pixels | 659 (H) x 494 (V) |
| Horizontal Scanning Frequency | 59.94 kHz |
| Pixel Frequency | 24.545 MHz |
| Pixel Size | 5.6 x 5.6 (µm) |
| Minimum Object Illumination | F1.4 1 lx |
| Sensitivity | F5.6 400 lx |
| Standard Illumination Color Temperature | 3200°K |
| Gain Switching | MANUAL 0 dB to +18 dB |
| Electronic Shutter | OFF to 1/10000 s |
| Sync Method | Internal Synchronization; External Synchronization HD / VD |
| External Trigger | Fixed Shutter Exposure / Pulse Width Exposure Restart Reset |
| Partial Scan | 1/2, 1/4, 1/6 SCAN |
| Other Functions | - |
| Gamma Correction | OFF Fixation |
| Communication Interface | - |
| External Dimensions | 42 mm x 42 mm |
Important Note about the Power Supply and Repair
Power supply of some products is adapted to Japanese 100V specifications. In case of using it outside of Japan, please be sure to use a voltage converter for each country/area.Also, when you need to repair the products purchased from Pulse Denshi, please send them back to us so we can offer repair cost estimates. Your local service center may not accept such repair.
Company and product names mentioned in this website are trademarks of their respective owners.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
 |