 |
|||
 |
|||
|
|||||
$$$ |
VCC-GC10 Series |
Features
 | 22 mm Cubic Shape |
| Low Power Consumption |
| NF Lens Mount |
| Partial Scan Function |
| External Trigger |
| CMOS Sensor |
Specifications
VCC-GC10V31L |
|
| Screen Resolution | VGA |
| Frame Rate | 60 fps |
| Output Resolving Power | 8 bit / 10 bit |
| Power Consumption | 1 W Max. |
| Power Supply Input Voltage | +12 VDC +/- 10% |
| Image Sensor | 1/3 inc CMOS |
| Number of Video Output Effective Pixels | 640 (H) x 480 (V) |
| Horizontal Scanning Frequency | 31.468 kHz |
| Pixel Frequency | 24.5 MHz |
| Minimum Object Illumination | F1.4 1 lx |
| Sensitivity | F5.6 400 lx |
| Shutter | 1/60 s (OFF) to 1/30,000 s |
| Gamma Correction | OFF (1.0) Fixation |
| Gain Variableness Range | -2 dB to +12 dB |
| Sync Method | Internal Synchronization, External Synchronization |
| Lens Mount | NF Mount |
| Video Output | PoCL-Lite |
| Environmental Conditions | Performance Guarantee Temperature: 0°C to 40°C Operating Ambient Temperature: -5°C to +50°C Humidity: 20 to 80% |
| Mass | Approx. 19g |
| External Dimensions | 22 mm (W) ×22 mm (H) ×22 mm (L) |
Important Note about the Power Supply and Repair
Power supply of some products is adapted to Japanese 100V specifications. In case of using it outside of Japan, please be sure to use a voltage converter for each country/area.Also, when you need to repair the products purchased from Pulse Denshi, please send them back to us so we can offer repair cost estimates. Your local service center may not accept such repair.
Company and product names mentioned in this website are trademarks of their respective owners.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
All information and specifications are subject to change without notice.
All rights reserved. No part of this website may be reproduced.
 |