K-A20 / 40 / 80 / 120 Multiple-battery Charger - Kenko Tokina Co., Ltd.
Overview
With a single device, 20 (K-A20), 40 (K-A40), 80 (K-A80) and 120 (K-A120) of rechargeable batteries can be charged.
|
Specifications
Items |
K-A20 |
K-A40 |
K-A80 |
K-A120 |
Product Configuration |
Battery Charger
|
Adapter (100 - 240 V, 50/60 Hz)
|
Conversion connector for Japan
|
Main Unit Size (mm) |
W250 x D250 x H45
|
W250 x D430 x H45
|
W430 x D430 x H45
|
W430 x D640 x H45
|
Main Unit Weight (not including rechargeable battery and adapter)
|
Approx. 0.8 kg
|
Approx. 1.8 kg
|
Approx. 3.2 kg
|
Approx. 4.2 kg
|
Number of batteries to be charged |
20 pcs.
|
40 pcs.
|
80 pcs
|
120 pcs
|
Charging Time |
Approximately 6 hours (2500 mAh as the standard)
|
LED Display |
Charging (blinking at 2-second interval)
|
Completed (continue to light)
|
Check / abnormal mode (blinking at 0.5-second interval)
|
Charging Voltage |
1.2 VDC 400 mA x 20 pcs.
|
1.2 VDC 400 mA x 40 pcs.
|
1.2 VDC 400 mA x 80 pcs
|
1.2 VDC 400 mA x 120 pcs
|
Working Voltage |
12 VDC 2A
|
12 VDC 4A
|
12 VDC, 8 A in total
|
12 VDC, 12 A in total
|
Important Note about the Power Supply and Repair
Power supply of some products is adapted to Japanese 100V specifications. In case of using it outside of Japan, please be sure to use a voltage converter for each country/area.
Also, when you need to repair the products purchased from Pulse Denshi, please send them back to us so we can offer repair cost estimates. Your local service center may not accept such repair.
Company and product names mentioned in this website are trademarks of their respective owners. All information and specifications are subject to change without notice. All rights reserved. No part of this website may be reproduced.
|